TM 9-2320-363-34-2
FORWARD-REAR AXLE DIFFERENTIAL CARRIER REPAIR (CONT)
102. LOWER INPUT SHAFT (28) AND REMOVE LIFTING DEVICE.
103. TIGHTEN SEVEN CAPSCREWS (57) TO 75-95 LB-FT (100-130 N.m). ROTATE INPUT SHAFT (28)
IN EACH DIRECTION TO MAKE SURE BEARINGS ARE INSTALLED CORRECTLY.
104. REMOVE NUT (44), SPACER (43), AND YOKE (42).
105. INSTALL NEW OIL SEAL (61), YOKE (42), AND NEW LOCK NUT (44). USING YOKE HOLDER
BAR, TIGHTEN LOCK NUT TO 450-600 LB-FT (610-815 N.m).
17-44
