TM 9-2320-363-34-2
90. INSTALL JAM NUT (51) AND ADJUSTING SCREW (52) IN DIFFERENTIAL CARRIER (3).
91. INSTALL SHIFT SHAFT (53), NEW SEAL (54), COVER (55) AND FOUR SOCKET HEAD SCREWS
(56). TIGHTEN FOUR SOCKET HEAD SCREWS TO 49-76 LB-IN. (5.5-8.5 N.m).
CAUTION
ALL EXCEPT M915A2: Make sure one of two notches on pinion
differential case is alined with helical driven gear. Failure to do so
may prevent proper installation of input shaft.
92. CONNECT SUITABLE LIFTING DEVICE THRU YOKE (42) AND INSTALL INPUT SHAFT (28) IN
DIFFERENTIAL CARRIER (3).
Change 1
17-41
