TM9-2320-363-34-2
TRANSFER CASE REPAIR (CONT)
56.
INSTALL YOKE SPACER (76) ON INPUT SHAFT ASSEMBLY (13).
57.
IF REMOVED. INSTALL NEW PLUG (77) IN TRANSFER CASE FRONT HALF (4).
58.
INSTALL PLATE (78) NUT (79) AND SHIFT ROD END (80) ON SHIFT ROD (18).
59.
IF REMOVED, INSTALL PLUG (81) FILL PLUG (82) PLUG (83) AND DRAIN PLUG (84) IN
TRANSFER CASE REAR HALF (5).
60.
INSTALL SENDING UNIT (85).
NOTE
Follow-on Maintenance:
Install lubrication pump (page 3-276).
Install air shift chamber (page 3-270).
Install transfer case yokes and oil seals (page 3-274).
Install speed sensor (TM 9-2320-363-20).
Install breather (TM9-2320-363-20).
15-22
Change 1
