TM9-2320-363-34-2
TRANSFER CASE REPAIR (CONT)
46.
47.
48.
49.
NOTE
Sleeve is not used on M916A2, M917A1 and M917A1 w/MCS.
APPLY LIGHT BEAD OF ADHESIVE TO INSIDE OF END CAP (59) FLANGE AND INSIDE OF NUT
ON SLEEVE (60) AND INSTALL END CAP (59)
INSTALL SIX NEW LOCK WASHERS (61) ON SIX CAPSCREWS (62).
APPLY LIGHT COAT OF ADHESIVE TO THREADS OF CAPSCREWS (62) AND INSTALL THRU
END CAP (59).
NOTE
Perform step 49 for M916A1.
INSTALL SPEEDOMETER DRIVE SHAFT (63), SPRING (64), THRUST WASHER (65), THRUST
BEARING (66). AND SLEEVE (60).
NOTE
Perform step 49.1 for M916A2. M917A1, and M917A1 w/MCS.
49.1.
INSTALL PLUG (66.1) IN END CAP (59).
15-20
Change 1
