TM 9-2320-363-34-2
4.
INSTALL GEAR (5) ON INPUT SHAFT (1) AND SEAT AGAINST SPACER (2).
5.
INSTALL SPACER (6).
6.
PRESS BEARING (7) TO SEAT AGAINST SPACER (6).
7.
COAT BEARING (7) WITH GAA.
8.
TURN INPUT SHAFT (1) OVER AND INSTALL SHIFT COLLAR (8) SO LARGER TAPER IS DOWN.
9.
INSTALL SPACER (9), NEEDLE BEARING (10), SPACER (11), AND NEEDLE BEARING (10).
10. COAT TWO NEEDLE BEARINGS (10) WITH GREASE.
15-27
