TM9-2320-363-34-2
39.
40.
41.
42.
43.
44.
45.
INSTALL COVER (50), TWO NEW LOCK WASHERS (51), AND TWO CAPSCREWS (52).
INSTALL STRAINER (53) AND ELBOW (54).
INSTALL SHIMS (55). BEARING COVER (56). SIX NEW LOCK WASHERS (57), AND SIX
CAPSCREWS (58). TlGHTEN CAPSCREWS TO 60 LB-FT (81 N.m).
MOUNT DIAL INDICATOR (30) ON MACHINED SURFACE WITH
RESTING ON INPUT SHAFT (13).
DIAL INDICATOR SHAFT (47)
CHECK END PLAY BY APPLYING PRESSURE TO OPPOSITE
CORRECT END PLAY IS 0.003-0.006 IN. (0.08-0.15 mm). ADD
ACHIEVE CORRECT END PLAY.
END OF INPUT SHAFT (13).
OR REMOVE SHIMS (55) TO
REMOVE SIX CAPSCREWS (58), SIX NEW LOCK WASHERS (57), AND BEARING COVER (56).
APPLY LIGHT BEAD OF ADHESIVE TO INSIDE OF BEARING COVER (56) FLANGE AND INSTALL
BEARING COVER (56) AS IN STEP 41.
15-19
