TM 9-2320-363-34-2
Section XI. GEAR UNIT AND MAIN SHAFT REPLACEMENT AND
REPAIR
This section illustrates and describes procedures for removal, disassembly, cleaning, inspection, repair,
assembly, and installation of the gear unit and main shaft.
Replacement and repair of the gear unit and main shaft is general support maintenance.
GEAR UNIT AND MAIN SHAFT REPLACEMENT AND REPAIR
This task covers: a. Removal b. Disassembly c. Cleaning d. Inspection e. Repair f. Assembly
g. Installation
INITIAL SETUP
Tools and Special Equipment:
Equipment Condition:
Shop Equipment, SC 4910-95-CL-A31
Tool Kit, SC 5180-90-CL-N05
Sun Gear Bushing Reamer Set, J28489
Bushing installer, J24201-A
Main Shaft Lifting Bracket, J24196
Bushing Swager, J26997-A
M a t e r i a l s / P a r t s:
Compound,
Appendix B, Item 16
Sealing
Oil, Lubricating
Appendix B, Item 37
Personnel Required: (2)
Reference
Page 14-105
General Safety Instructions:
Condition Description
Third Clutch and
Housing Removed
W A R N I N G
A d h e s i v e s , s o l v e n t s , a n d
sealing compounds can burn
e a s i l y , c a n g i v e o f f h a r m f u l
vapors, and are harmful to skin
and clothing. To avoid injury or
death, keep away from open
fire and use in well-ventilated
area. If adhesive, solvent, or
sealing compound gets on skin
or clothing, wash immediately
with soap and water.
14-116
