TM 9-2320-363-34-2
10.
11.
12.
13.
14.
15.
TIGHTEN SUPPORT HOUSING ANCHOR SCREW (8) TO 45 LB-FT (61 N.m).
SOAK FOUR FRICTION PLATES (16) IN LUBRICATING OIL FOR 2 MINUTES.
NOTE
Thick steel plates must be installed on bottom of stack.
INSTALL STEEL PLATE (17) WITH GAP (18) FACING AS SHOWN.
INSTALL SEVEN CLUTCH PLATES (16 AND 17) STARTING WITH FRICTION PLATE (16) AND
ALTERNATING WITH STEEL PLATE (17).
INSTALL BACKING PLATE (19).
INSTALL RETAINING RING (20) WITH GAP OPPOSITE OIL PAN SIDE (15) OF TRANSMISSION
HOUSING (4).
NOTE
Follow-on Maintenance:
Install fourth clutch (page 14-96).
Install control valve (page 14-74).
14-115
