TM 9-2320-363-34-2
5.
BOLT SUPPORT FIXTURE BASE PLATE (7) TO BENCH. INSTALL SUPPORT FIXTURE SOCKET (8)
ON BASE PLATE. INSTALL SUPPORT FIXTURE HEX BIT (9) ON SOCKET (8).
6.
PLACE SMALL SUPPORT FIXTURE SUPPORT (10) ON BASE PLATE (7). INSTALL CENTER
HOUSING (2) AND TURBINE WHEEL ASSEMBLY (11) ON SUPPORT (10) WITH TURBINE WHEEL
SHAFT ON HEX BIT (9).
C A U T I ON
Be prepared to catch turbine wheel assembly and turbine shroud if they fall
free when compressor wheel is removed. Damage to components could
result if dropped to floor.
Note that compressor wheel nut has left-hand threads to prevent damage to
equipment.
7.
REMOVE COMPRESSOR WHEEL NUT (12) WITH NUT WRENCH.
12-173
