TM 9-2320-363-34-1
N O T E
Perform step 1 for all except M915A2. Perform step 2 for M915A2.
1.
INSTALL TWO MOUNTING BRACKETS (1), TWO TORQUE RODS (2), THREE WASHERS (3),
THREE SCREWS (4), THREE WASHERS (5), AND THREE NUTS (6) ON FRAME (7).
2.
INSTALL TWO MOUNTING BRACKETS (8), TWO TORQUE RODS (9), TWO WASHERS (10), TWO
SCREWS (11), TWO WASHERS (12), AND TWO NUTS (13) ON FRAME (14).
NOTE
Steps 3 thru 5 are the same for all vehicles.
3.
INSTALL TWO SPACER WASHERS (15), TWO WASHERS (16), TWO SCREWS (17), TWO
WASHERS (18), AND TWO NUTS (19) IN FORWARD-REAR AXLE (20).
4.
REPEAT STEP 3 TO CONNECT TORQUE ROD TO REAR AXLE (21)
5.
REMOVE JACKSTANDS FROM UNDER INPUT YOKE (22) OF REAR AXLE (21) AND FROM
UNDER INPUT YOKE (23) OF FORWARD-REAR AXLE (20).
Change 1
9-17
