TM 9-2320-363-34-1
REAR SPRING AND SADDLE ASSEMBLY REPLACEMENT
This task covers:
a. Removal b. Cleaning c. Inspection d. Installation
Tools and Special Equipment:
Shop Equipment, SC 4910-95-CL-A31
Tool Kit, SC 5180-90-CL-N05
Equipment Condition:
Reference
Condition Description
Page 9-22 or 9-28
Equalizing Beam
Removed
General Safety Instructions:
W A R N I NG
Spring and saddle assembly
weighs 420 lb (190 kg). Use
floor jack to lift and support
spring and saddle assembly.
Failure to do so could result in
injury to personnel.
W A R N I NG
Spring and saddle assembly weighs 420 lb (190 kg). Use floor jack to lift and
support spring and saddle assembly. Failure to do so could result in injury to
personnel.
1.
2.
3.
4.
5.
USING FLOOR JACK, SUPPORT SPRING AND SADDLE ASSEMBLY (1).
REMOVE TWO NUTS (2), TWO WASHERS (3), TWO SCREWS (4), TWO WASHERS (5), AND PIN
(6) FROM FORWARD MOUNTING BRACKET (7).
REMOVE FlTTING (8) FROM PIN (6),
REMOVE NUT (9), WASHER (10), SCREW (11), WASHER (12), AND SPACER (13) FROM REAR
MOUNTING BRACKET (14).
LOWER SPRING AND SADDLE ASSEMBLY (1) AND REMOVE SPACER (15).
Use general cleaning methods to clean all park (page 2-30).
Inspect all parts for wear or damage.
9-12
