TM 9-2320-363-34-1
1.
INSTALL SPACER (15).
W A R N I N G
Spring and saddle assembly weighs 420 lb (190 kg). Use floor jack to lift and
support spring and saddle assembly. Failure to do so could result in injury to
personnel.
2.
USING FLOOR JACK, RAISE SPRING AND SADDLE ASSEMBLY (1) INTO POSITION.
3.
INSTALL SPACER (13), WASHER (12), SCREW (11), WASHER (10), AND NUT (9) IN REAR
MOUNTING BRACKET (14).
4.
INSTALL FITTING (8) IN PIN (6).
5.
INSTALL PIN (6), TWO WASHERS (5), TWO SCREWS (4), TWO WASHERS (3), AND TWO NUTS
(2) IN FORWARD MOUNTING BRACKET (7).
NOTE
Follow-on Maintenance:
Install equalizing beam (page 9-22 or 9-28).
9-13
