TM 9-2320-363-34-1
NOTE
Procedure is the same for both steering knuckles.
1.
USING BUSHING DRIVER, INSTALL TWO NEW BUSHINGS (1) AS FOLLOWS:
PRESS BUSHING (1) INTO STEERING KNUCKLE (2) 1/8 IN. AND RELIEVE PRESSURE,
PRESS BUSHING (1) INTO STEERING KNUCKLE (2) ANOTHER 1/2 IN. AND RELIEVE
PRESSURE.
PRESS BUSHING (1) INTO STEERING KNUCKLE (2) UNTIL BUSHING IS 5/16 IN. BELOW SEAL
COUNTERBORE.
REPEAT FOR REMAINING BUSHING (1).
5-47
