TM 9-2320-363-34-1
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
INSTALL PIN (3) IN SPACER (4).
COAT TOP OF SPACER (4) WITH ALUMILASTIC AND INSTALL SPACER (4) ON TOP OF SHIM (2).
INSTALL AXLE (1).
COAT BOTTOM AND U-BOLT SADDLES OF TWO AXLE STOPS (5) With ALUMILASTIC.
INSTALL TWO AXLE STOPS (5), FOUR U-BOLTS (6), EIGHT WASHERS (7), AND EIGHT NUTS (8)
ON AXLE (1). TIGHTEN NUTS TO 380-460 LB-FT (515-624 N.m).
REMOVE FLOOR JACK FROM UNDER VEHICLE.
INSTALL TIE ROD (9) AND TWO CASTELLATED
(224-244 N.m).
NUTS (1O). TIGHTEN NUTS TO 165-180 LB-FT
INSTALL TWO NEW COTTER PINS (11) THRU TWO CASTELLATED NUTS (1O).
ON LEFT SIDE, INSTALL DRAG LINK (12) AND CASTELLATED NUT (13), TIGHTEN NUT TO
165-180 LB-FT (224-244 N.m).
INSTALL NEW COTTER PIN (14) THRU CASTELLATED NUT (13).
NOTE
Follow-on Maintenance:
Install front brake spider and brake chamber bracket (TM 9-2320-363-20).
Check and adjust front axle caster alinement (page 5-60).
5-43
