TM 9-2320-363-34-1
FRONT STEERING KNUCKLE REPLACEMENT AND REPAIR (CONT)
11. PRY UP ON STEERING KNUCKLE (2) WHILE OBSERVING DIAL INDICATOR. VERTICAL END PLAY
MUST BE 0.001-0.025 IN. (0.02-0.64 mm). IF VERTICAL END PLAY IS LESS THAN 0.001 IN. (0.02
mm), REMOVE SHIM(S) TO ACHIEVE VERTICAL END PLAY. IF VERTICAL END PLAY IS MORE
THAN 0.025 IN. (0.64 mm), ADD SHIM(S) TO REDUCE VERTICAL END PLAY.
12. IF SHIM(S) IS TO BE ADDED OR REMOVED, PERFORM REMOVAL STEPS 3 THRU 7 AND
INSTALLATION STEPS 1 THRU 11 UNTIL CORRECT VERTICAL END PLAY IS ACHIEVED.
5-50
