TM 9-2320-363-34-1
GEAR CASE COVER REPLACEMENT
This task covers:
a. Removal b. Cleaning c. Inspection d. Installation
Tools and Special Equipment:
Equipment Condition (Cont):
Shop Equipment, SC 4910-95-CL-A31
Reference
Condition Description
Tool Kit, SC 5180-90-CL-N05
Guide Stud (2), J36107
.
.
Materials/Parts:
Ring, Seal
Eliminator,
Gasket
Oil, Lubricating
References:
TM 9-2320-363-20
Equipment Condition:
Reference
TM 9-2320-363-20
Page 7-2
TM 9-2320-363-20
Page 3-126
Accessory Drive
Removed
Page 3-92
Air Compressor Drive
P/N 5141452
Removed
Appendix B, Item 18
TM 9-2320-363-20
Water Pump Removed
Page 3-56
Fan Drive Supporl
Appendix B, Item 37
Removed
Page 3-220
Oil Pan Removed
Page 3-46
Front Engine Mount
Adapter Removed
General Safety Instructions:
Condition Description
Alternator Removed
Power Steering Pump
Removed
Tachometer Drive
Removed
W A R N I N G
Gear case cover weighs 89
lb (40 kg). Attach suitable
lifting device prior to removal
or installation to prevent
possible injury to personnel.
Be careful not to slide gear
case cover off guide studs.
To do so could result in injury
to personnel or equipment
damage.
C A U T I ON
Use wood blocks on jack stands to protect oil pan flange.
1.
INSTALL JACK STAND UNDER EACH SIDE OF OIL PAN FLANGE. REMOVE PREVIOUSLY
INSTALLED SUPPORT.
3-116
