TM 9-2320-363-34-1
NOTE
Replace injector seal rings when replacing injector.
8.
REMOVE AND DISCARD THREE INJECTOR SEAL RINGS (13 AND 14) FROM INJECTOR (11),
REPEAT STEPS 5 THRU 8 FOR REMAINING INJECTORS.
Use general cleaning methods to clean all parts (page 2-30).
C A U T I ON
Make sure injector seal rings are not cut or nicked and are installed
completely in grooves to prevent damage to equipment.
1.
LUBRICATE THREE NEW INJECTOR SEAL RINGS LIGHTLY WITH ENGINE OIL AND INSTALL ON
INJECTOR (1).
2.
INSTALL TWO LOWER SEAL RINGS (2) IN TWO LOWER GROOVES (3).
3.
INSTALL LARGER SEAL RING (4) IN UPPER GROOVE (5).
3-111
