TM 9-2320-363-34-1
GEAR CASE COVER REPLACEMENT (CONT)
W A R N I NG
Be careful not to slide gear case cover off guide studs. To do so could result
in injury to personnel or equipment damage.
8.
MOVE GEAR CASE COVER (4) AWAY FROM GEAR HOUSING (5) AND POSITION NYLON ROPE
THRU TACHOMETER DRIVE COVER OPENING ON GEAR CASE COVER (4).
W A R N I N G
Gear case cover weighs 89 lb (40 kg). Attach suitable lifting device prior to
removal to prevent possible injury to personnel.
9.
SECURE NYLON ROPE TO SUITABLE LIFTING DEVICE, SLIDE GEAR CASE COVER (4) OFF TWO
GUIDE STUDS (14).
10. REMOVE AND DISCARD SEAL RING (16) BETWEEN BULL/IDLER GEAR HUB RECESS (17) AND
GEAR CASE COVER (4).
11. REMOVE TWO GUIDE STUDS (14).
12. REMOVE ALL OLD GASKET
AND GEAR HOUSING (5).
13. REMOVE FRONT OIL SEAL
ELIMINATOR FROM MATING SURFACES OF GEAR CASE COVER (4)
(18) FROM GEAR CASE COVER (4). DISCARD OIL SEAL.
3-118
