TM 9-2320-363-34-1
AIR INTAKE MANIFOLD REPLACEMENT (CONT)
C A U T I ON
Do not use lubricant on inside of air compressor inlet hose, on hose contact
surfaces of intercooler ducting, or on air intake manifold. Lubricant can cause
hose to blow off when turbocharger builds up pressure.
13. COAT THREADS OF NIPPLE (11) WITH SEALING COMPOUND AND INSTALL NIPPLE (11), TEE
(12), CHECK VALVE (13), AND TWO NIPPLES (14 AND 15) IN AIR INTAKE MANIFOLD (1).
14. CONNECT AIR LINE CONNECTOR (16) TO NIPPLE (14).
15. CONNECT AIR LINE CONNECTOR (17) TO NIPPLE (15).
16. CONNECT AIR COMPRESSOR INLET HOSE (18) TO AIR SUPPLY CONNECTOR (6).
17. POSITION AND TIGHTEN HOSE CLAMP (19).
NOTE
Follow-on Maintenance:
lnstall air intake manifold to intercooler tube (TM 9-2320-363-20).
Install ether atomizer and bushing (TM 9-2320-363-20).
Connect batteries (TM 9-2320-363-20).
3-66
