TM 9-2320-363-34-1
A I R I N T A K E M A N I F O L D R E P L A C E M E N T ( C O N T )
3.
DISCONNECT ENGINE WIRING HARNESS (6) FROM TURBO BOOST SENSOR (7).
4.
REMOVE TWO RETAINING BOLTS (8) AND TURBO BOOST SENSOR (7).
5.
REMOVE AND DISCARD SEAL RING (9).
6.
REMOVE FIVE LONG BOLTS (10) AND TWO SHORT BOLTS (11) FROM AIR INTAKE MANIFOLD
(5).
7.
IF NECESSARY, USE BRASS DRIFT AND TAP AIR INTAKE MANIFOLD (5) LIGHTLY TO LOOSEN
FROM CYLINDER HEAD (12). REMOVE AIR INTAKE MANIFOLD AND THREE GASKETS (13).
DISCARD GASKETS.
8.
REMOVE AIR TEMPERATURE SENSOR (14) FROM AIR INTAKE MANIFOLD (5).
Use general cleaning methods to clean all parts (page 2-30).
Inspect air intake manifold for cracks, particularly in mounting bolt boss areas. If cracked, discard
air intake manifold.
3-66.2
Change 1
