TM 9-2320-363-34-1
AIR INTAKE MANIFOLD REPLACEMENT
This task covers:
a. Removal b. Cleaning
c. Inspection d. Installation
Applicable Configuration:
M915A2 and M916A1
Tools and Special Equipment:
Equipment Description:
Reference
Condition Description
TM 9-2320-363-20
Air Intake Manifold to
Intercooler Tube Removed
Shop Equipment, SC 4910-95-CL-A31
Tool Kit. SC 5180-90-CL-N05
Guide, Stud (2), J36107
Caulking Gun, 805774
Materials/Parts:
Ring, Seal
P/N 5182977
Eliminator, Gasket
Appendix 6, Item 18
Oil, Lubricating
Appendix B, Item 37
Compound, Pipe
Appendix B, Item 15
Sealing
References:
TM 9-2320-363-20
TM 9-2320-363-20
Ether Atomizer and
Bushing Removed
TM 9-2320-363-20
Batteries Disconnected
General Safety Instructions:
WARNING
Make sure all air lines and fittings are clear of
debris. Make sure excess pipe sealing
compound does not enter air lines or fittings.
Failure to do so could result in equipment
failure and/or injury to personnel.
1.
LOOSEN HOSE CLAMP (1) AND DISCONNECT AIR COMPRESSOR INLET HOSE (2) FROM AIR
SUPPLY CONNECTOR (3).
2.
REMOVE AIR SUPPLY CONNECTOR (3) AND REDUCER (4) FROM AIR INTAKE MANIFOLD (5).
Change 1
3-61
