3-64
TM 9-2320-363-34-1
AIR INTAKE MANIFOLD REPLACEMENT (CONT)
2.
3.
4.
5.
6.
7.
INSTALL TWO GUIDE STUDS IN UPPER CENTER
NOTE
Make sure all wires are clear of intake
installing manifold.
BOLT HOLES OF CYLINDER HEAD (2).
manifold connection points before
INSTALL AIR INTAKE MANIFOLD (1) OVER TWO GUIDE STUDS AND AGAINST CYLINDER HEAD (2).
INSTALL TWO SHORT BOLTS (3) HAND-TIGHT IN AIR INTAKE MANIFOLD (1) (ONE ON EACH END).
REMOVE GUIDE STUDS.
INSTALL FIVE LONG BOLTS (4) HAND-TIGHT
TIGHTEN SEVEN BOLTS (3 AND 4) TO 43-54
IN AIR INTAKE MANIFOLD (1).
LB-FT (58-73 N.m) IN SEQUENCE SHOWN.
