TM 9-2320-363-34-1
A I R I N T A K E M A N I F O L D R E P L A C E M E N T
This task covers:
a. Removal b. Cleaning
c. Inspection d. Installation
Applicable Configuration:
Equipment Description:
All except M915A2 and M916A1
Reference
Condition Description
Tools and Special Equipment:
Shop Equipment, SC 4910-95CL-A31
Tool Kit, SC 5180-90-CL-N05
Materials/Parts:
Ring, Seal
Gasket (2)
Oil, Lubricating
Compound, Pipe
Sealing
P/N 5182977
P/N 23514622
Appendix B, Item 37
Appendix B, Item 15
References:
TM 9-2320-363-20
TM 9-2320-363-20
Air Intake Manifold to
Intercooler Tube Removed
TM 9-2320-363-20
Batteries Disconnected
General Safety Instructions:
W A R N I N G
Make sure all air lines and fittings are clear of
debris. Make sure excess pipe sealing
compound does not enter air lines or fittings.
Failure to do so could result in equipment
failure and/or injury to personnel.
1.
LOOSEN HOSE CLAMP (1) AND DISCONNECT AIR COMPRESSOR INLET HOSE (2) FROM AIR
SUPPLY CONNECTOR (3).
2.
REMOVE AIR SUPPLY CONNECTOR (3) AND REDUCER (4) FROM AIR INTAKE MANIFOLD (5).
Change 1 3-66.1
