TM 9-2320-363-20-1
3.
Lifting Always use chain hoist, jack, or other aid when lifting heavy parts. Make certain load limit of lifting device
exceeds weight being lifted. Position and rig lifting device before connecting part for installation.
GENERAL LUBRICATION INSTRUCTIONS
Keep light coat of lubricating oil (PL-medium or PL-special) on parts during repair procedures to prevent rusting.
Lubricate parts during the repair and assembly as required by TM 9-2320-363-10 and Unit PMCS.
GENERAL TORQUE VALUE INSTRUCTIONS
Use the torque values listed in the maintenance procedures, if they are given. When no torque values are given in the
maintenance procedures, refer to the torque value guide in Appendix E.
PREPARATION FOR MAINTENANCE
Some maintenance tasks are necessary to prepare the vehicles for many of the maintenance procedures in Chapter
4. These tasks are required for personnel safety and for ease of maintenance. These preparation steps are described
below.
BLOCKING THE VEHICLE
During the maintenance procedures, the vehicle wheels must be chocked to prevent roll off. Chock all wheels both in
front and behind each wheel.
Refer to TM 5-3805-264-14&P for information on safety issues related to maintenance on components located under
the dump body.
Change 3 2-27
