TM9-2320-363-20-1
TYPICAL PANEL MOUNTING RECEPTACLE: DISASSEMBLY AND ASSEMBLY
lDISASSEMBLY
1.
UNSCREW
NUT FROM SHELL ASSEMBLY
AND SLIDE BACK ON CABLE LEADS.
2.
PUSH GROMMET
BACK ON CABLE LEADS.
3.
DRIVE CONTACTS
OUT THRU
REAR OF INSERT WITH PIN EXTRACTOR.
4.
PUSH INSERT OUT THRU REAR OF SHELL.
5.
UNSOLDER
CABLE LEADS FROM CONTACTS.
ASSEMBLY
1.
STRIP CABLE INSULATION
EQUAL TO DEPTH OF SOLDER WELLS OF CONTACTS.
2.
SLIDE NUT OVER CABLE LEADS.
3.
SLIDE GROMMET
OVER CABLE LEADS.
4.
INSERT CABLE LEADS INTO SOLDER
WELLS OF CONTACTS,
AND SOLDER.
5.
PUSH INSERT INTO SHELL FROM REAR UNTIL SEATED. GROOVE
IN INSERT MUST BE ALlNED
WITH GUIDE IN SHELL TO ENSURE
PROPER
FIT.
6.
PUSH CONTACTS
INTO INSERT
FROM REAR UNTIL SEATED.
7.
PUSH GROMMET
DOWN CABLE LEADS AND OVER SOLDER WELLS OF CONTACTS.
8.
SCREW
NUT ONTO SHELL ASSEMBLY.
3-3
