TM 9-2320-302-34
0010 00-18
POWER PACK REPLACEMENT - CONTINUED
0010 00
INSTALLATION
WARNING
Power pack weighs 3750 lb (1702 kg). Use hoist with lifting capacity of 5000 lb (2270 kg) to lift and support
power pack. Failure to do so could result in injury to personnel.
CAUTION
•
Ensure all harnesses, tubes, and hoses are clear of power pack prior to installation. Failure to do so
could result in damage to equipment.
•
Keep power pack clear of frame. Failure to do so could result in damage to equipment.
1.
Using suitable hoist and sling spreader, maneuver power pack into vehicle.
2.
Alternately lower hoist in small increments until power pack is in place.
3.
Right side only: install bracket (168), two washers (167), screws (166), washers (165), and nuts (164) in right engine
mount (169). Do not tighten nuts.
166
167
166
167
169
165
164
168
