TM 9-2320-302-34
0010 00-20
POWER PACK REPLACEMENT - CONTINUED
0010 00
INSTALLATION - CONTINUED
6.
Tighten four nuts (164 and 170) on two rear engine mounts (169 and 174).
7.
Install two plugs (153 and 154) in engine flywheel housing (155).
8.
Install two hoses (142) and pipe (141) and tighten four clamps (140).
9.
Install hose and pipe assembly (152) and tighten clamp (151).
10.
Connect hose (149) to transmission oil cooler (150) and tighten clamp (148).
11.
Install washer (146), capscrew (145), clamp (147), washer (144), and nut (143).
12.
Rotate bracket (139) into position and install washer (138) and screw (137).
153
154
155
145
146
147
144
143
142
142
140
141
150
148
151
149
152
147
140
