TM 9-2320-302-34
0010 00-14
POWER PACK REPLACEMENT - CONTINUED
0010 00
REMOVAL - CONTINUED
48.
Left side only: remove two nuts (170), washers (171), screws (172), and washers (173) from left engine mount (174).
WARNING
Power pack weighs 3750 lb (1702 kg). Use hoist with lifting capacity of 5000 lb (2270 kg) to lift and support
power pack. Failure to do so could result in injury to personnel.
CAUTION
•
Ensure all harnesses, tubes, and hoses are clear of power pack prior to removal. Failure to do so could
result in damage to equipment.
•
Keep power pack clear of frame. Failure to do so could result in damage to equipment.
49.
Using suitable hoist and sling spreader, lift power pack slightly.
50.
Adjust load so that front of engine is raised as high as possible to clear frame crossmember. Remove power pack from
vehicle.
POWER PACK SEPARATION
WARNING
Do not place finger in hole of engine flywheel housing while engine is being barred over. To do could result
in serious injury to personnel.
170
171
174
172
173
