TM 9-2320-302-34
0098 00-1
REAR CAB MOUNTS REPLACEMENT
0098 00
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Tools and Special Tools
Tool kit, general mechanic’s (Item 132, WP 0126 00)
Sling, beam type (Item 115, WP 0126 00)
Materials/Parts
Nut, lock (P/N MS51922-17) (8)
Nut, lock (P/N MS51922-49) (2)
Personnel Required
Two
Equipment Condition
Front cab mounts removed (WP 0097 00)
WARNING
•
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during
procedure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep
clear of heavy parts supported only by lifting device. Failure to follow this warning may result in death
or injury to personnel.
•
Cab assembly weighs 1100 lb (499 kg). Use hoist with lifting capacity of 1400 lb (636 kg) to support
cab assembly. Failure to do so could result in injury to personnel and/or damage to equipment.
REMOVAL
1.
Remove two lock nuts (1) and washers (2). Discard lock nuts.
2.
Lift cab assembly (3) approximately 5 in (13 cm).
3.
Remove two screws (4), washers (5), and resilient mounts (6).
3
6
2
4
5
1
1
