TM 9-2320-302-34
0097 00-5
FRONT CAB MOUNTS REPLACEMENT - CONTINUED
0097 00
INSTALLATION
WARNING
Cab assembly weights 1100 lb (499 kg). Use hoist with lifting capacity of 1400 lb (636 kg) to support cab
assembly. Failure to do so could result in injury to personnel and/or damage to equipment.
NOTE
•
Procedure is the same for both sides except as noted.
•
Perform step 1 on right side.
1.
Install plate (39), three washers (38), screws (37), washers (36), and new lock nuts (35).
NOTE
Perform step 2 on left side.
2.
Install plate (34), three washers (33), screws (32), two brackets (31), three washers (30), and new lock nuts (29).
3.
Install front cab mount (21) with four washers (28), screws (27), washers (26), and new lock nuts (25).
4.
Install bushing (23), washer (24), and screw (22).
5.
Install resilient mount (19), washer (18), and new lock nut (17).
6.
Lower cab assembly (20) and remove cab sling and hoist.
NOTE
Perform steps 7 and 8 on left side.
7.
Connect cable (16) and install screw (15), washer (14), and new lock nut (13).
20
24
23
16
13,14,15
22
21
25,26,27,28
17
18
19
25,26,27,28
