TM 9-2320-302-34
0082 00-16
REAR-REAR AXLE DIFFERENTIAL CARRIER REPAIR - CONTINUED
0082 00
ASSEMBLY - CONTINUED
26.
Install yoke (16) and new lock nut (18).
27.
Rotate differential carrier (1) so that yoke (16) is in horizontal position.
28.
Using yoke holder bar (17) to hold yoke (16) in place, tighten lock nut (18) to 1000-1230 lb-ft (1356-1668 Nm).
29.
Install ring gear (2) on ring gear subassembly (10).
30.
Install 12 bolts (15), washers (14), and nuts (13). Tighten nuts to 190-225 lb-ft (258-305 Nm).
1
16
17
18
13,14,15
10
2
