TM 9-2320-302-34
0082 00-11
REAR-REAR AXLE DIFFERENTIAL CARRIER REPAIR - CONTINUED
0082 00
ASSEMBLY - CONTINUED
NOTE
To perform steps 10 and 11, a 20 in (50.8 cm) piece of 14 gage wire must be used.
8.
Maintain pressure and wrap 14 gage wire around bearing cage (23) several times.
NOTE
For accuracy, reading must be taken while bearing cage is rotating.
9.
Attach spring scale to end of wire and pull. As bearing cage (23) rotates, read and record value on scale.
10.
Measure diameter of bearing cage (23) where wire was wrapped and divide measurement in half to determine radius.
23
23
MEASURE DIAMETER
OF CAGE
