TM 9-2320-302-34
0071 00-27
TRANSMISSION OVERHAUL - CONTINUED
0071 00
MODULE OVERHAUL - CONTINUED
Rotating Clutch Module Assembly - Continued
17.
Install C1 clutch pack: first install one backplate (14), then alternately install friction (15) and steel reaction plates (16),
starting with a friction plate and ending with a backplate. Secure clutch pack in place with retaining ring (13).
18.
Install C1 drive hub (11) over clutch pack while aligning external splines.
19.
Install thrust bearing (12) on each side of C2 drive hub (10), then position this group over C1 drive hub (11).
20.
Install C2 clutch plates, alternating between friction plates (8) and steel reaction plates (9), starting with steel reaction
plates.
21.
Install C2 backplate (7) and retaining ring (6).
22.
Install thrust bearing (5) on sun gear (4).
23.
Install P1 sun gear assembly (4) and retaining ring (2).
24.
Install thrust bearing (1) on rotating clutch module (3).
23
20
2122
31
1
36
18
3
17
19
37
38
34
33
29
25
2427
16
15
14
26
14
13
8
9
10
12
12
11
2
5
4
6
7
32
35
28
30
