TM 9-2320-302-34
0071 00-32
TRANSMISSION OVERHAUL - CONTINUED
0071 00
MODULE OVERHAUL - CONTINUED
Main Shaft Module Disassembly
1.
Remove external spiral retaining ring (1) and P2 sun gear (2) from main shaft (3).
2.
Remove bearing spacer (4), thrust bearing (5), and selective shim (6) from main shaft (3).
3.
Inspect and measure main shaft (3). Inspect for evidence of wear, chipped or cracked splines or teeth. Measure main
shaft in accordance with Table 2, Wear Limits Data, located at the end of this work package.
Main Shaft Module Assembly
NOTE
Do not install thrust bearing (5) and selective shim (6) until final transmission assembly. Measurement for
selective shim is performed during final buildup.
1.
Install bearing spacer (4) on main shaft (3).
2.
Install P2 sun gear (2) and external spiral retaining ring (1) on main shaft (3).
1
2
4
6
5
3
35.92 mm
(1.414 in)
52.98 mm
(2.085 in)
35.92 mm
(1.414 in)
