TM 9-2320-302-34
0024 00-2
FLYWHEEL HOUSING REPLACEMENT - CONTINUED
0024 00
REMOVAL
1.
Remove four bolts (1) and washers (2) from flywheel housing (3).
2.
Install two guide studs (4).
3.
Remove eight bolts (5) and washers (6) from flywheel housing (3).
CAUTION
Use soft mallet to tap flywheel housing loose from cylinder block. Failure to use soft mallet could result in
damage to equipment.
4.
Remove flywheel housing (3).
5.
Remove and discard crankshaft rear oil seal (WP 0023 00).
6.
Remove two guide studs (4) from cylinder block (7).
4
3
2
1
4
1,2
6
5
4
7
7
