TM 9-2320-302-34
0018 00-1
CYLINDER HEAD REPLACEMENT
0018 00
THIS WORK PACKAGE COVERS
Removal, Inspection, Installation
INITIAL SETUP
Maintenance Level
Direct Support
Tools and Special Tools
Tool kit, general mechanic’s (Item 132, WP 0126 00)
Clamp, material lift (Item 20, WP 0126 00)
Wrench, torque, 15-75 lb-ft (Item 138, WP 0126 00)
Wrench, torque, 50-250 lb-ft (Item 139, WP 0126 00)
Materials/Parts
Gasket (P/N 23506120)
Compound, international, no. 2 (Item 13, WP 0125 00)
Tags, marker (Item 35, WP 0125 00)
Personnel Required
Two
Equipment Condition
Alternator removed (TM 9-2320-302-20)
Air conditioner compressor removed (WP 0117 00)
Thermostat and thermostat housing cover removed
(TM 9-2320-302-20)
Water level sensor removed (TM 9-2320-302-20)
Exhaust manifold removed (WP 0015 00)
Air intake manifold removed (WP 0014 00)
Air compressor cooling lines disconnected (TM 9-
2320-302-20)
Camshaft and bearings removed (WP 0026 00)
Fuel injectors removed (WP 0046 00)
Injector wiring harness removed (WP 0069 00)
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
