TM 9-2320-302-20
0025 00-4
OIL COOLER AND OIL FILTER ADAPTER MAINTENANCE - CONTINUED
0025 00
ASSEMBLY - CONTINUED
2.
Lightly coat threads of two hose fittings (10) and three pipe plugs (23) with pipe sealing compound. Install hose fittings
and pipe plugs in oil cooler (6).
3.
Lightly coat two retainer packings (20) with lubricating oil. Install retainer packings in oil filter adapter (12).
CAUTION
Ensure that all old gasket material is removed from core and oil cooler mating surfaces. Failure to follow
this caution could result in damage to engine.
4.
Install new gasket (22) and core (21) in oil cooler (6).
CAUTION
Ensure retainer packings are not dislodged when installing oil cooler on oil filter adapter. Failure to follow
this could result in damage to engine.
5.
Install oil cooler (6) on oil filter adapter (12) with seven long bolts (18) and three short bolts (19). Hand tighten bolts to
secure oil cooler (6) to oil filter adapter (12).
6.
Torque seven long bolts (18) and three short bolts (19) to 22-28 lb-ft (30-38 Nm) in sequence shown.
7.
Lightly coat new seal ring (15) with clean lubricating oil. Install seal ring on oil cooler (6).
8.
Lightly coat new o-ring (16) and new retainer packing (17) with clean lubricating oil. Install o-ring and retainer packing
on oil filter adapter (12).
15
18
22
21
20
12
16
17
19
6
