TM 5-2330-325-14&P
This task covers:
a. Removal
b. Installation
Initial Setup:
Equipment Conditions:
Materials/Parts:
Trailer parked on level ground and
Marker tag (item 20, Appendix F)
brakes engaged.
Tape, anti-seizing (item 21, Appendix F)
Tools/Test Equipment
General Safety Instructions:
Tool set, general mechanics,
Gooseneck must be securely supported during
NSN 5180-00-177-7033
procedure or attached to trailer.
WARNING
Gooseneck must be securely supported during this procedure and resting
on a firm foundation. Severe injury or death to personnel may occur if
gooseneck is unstable or tips.
High pressure hydraulics [oil under 2450 psi (16,893 kPa)] used to operate
this equipment can pierce body tissue and cause severe injury to personnel.
Never disconnect any hydraulic line or fitting without first dropping
pressure to zero.
Wear safety goggles when performing leakage tests on valves. Failure to
do so may result in serious eye injury due to high pressure oil.
a.
Removal.
(1)
Release all pressure from hydraulic lines.
(2)
Tag and disconnect four hydraulic lines (1) from pressure relief valve (3) inlet and outlet
ports and cap or tape closed openings in ports and lines.
CAUTION
Cap or plug all ports and hose ends to prevent contamination of hydraulic
oil. Failure to do so may result in damage to equipment.
(3)
Loosen and remove two locknuts (2) securing pressure relief valve (3) to gooseneck and
disconnect relief valve from mounting studs.
