TM 5-2330-325-14&P
4-65.
HYDRAULIC THROTTLE VALVE REPLACEMENT (Continued).
b.
Clean.
(1)
Clean throttle valve using WD-40 (item 7, Appendix F) and blow out using compressed air.
c.
Installation.
(1)
Remove tape or caps from lift cylinder fitting (4) and hydraulic line disconnected end (2)
and apply anti-seizing tape to threads of hydraulic line and lift cylinder fitting.
(2)
Install new O-ring (3) onto hydraulic lift cylinder fitting (4).
(3)
Reconnect throttle valve (1) to lift cylinder fitting (4) and hydraulic line (2) and tighten as
appropriate.
(4)
Pressurize system and check for leaks.
FOLLOW-ON TASKS:
None.
4-93
