TM 5-2330-325-14&P
4-64.
HYDRAULIC PRESSURE RELIEF VALVE REPLACEMENT (Continued)
b.
Installation.
(1)
Install pressure relief valve (3) onto gooseneck relief valve mounting studs and secure in
position with two locknuts (2). Torque locknuts to 9 ft-lb (12.20 Nm).
(2)
Remove tape and/or caps from four relief valve hydraulic lines (1) and relief valve ports and
apply anti-seizing tape to threads of hydraulic lines. Reconnect and tighten lines to
appropriate ports as directed by tags previously attached during removal procedure.
(3)
Pressurize system and check for leaks.
FOLLOW-ON TASKS:
None.
4-91
