TM 5-2330-325-14&P
4-39.
FRONT AND REAR 24-VOLT RECEPTACLE REPLACEMENT (Continued).
b.
Installation.
NOTE
For front 24-volt receptacle follow Steps 1 thru 4.
For rear 24-volt receptacle follow Steps 5 thru 8.
(1)
Position receptacle harness (16) onto gooseneck frame (4).
(2)
Plug receptacle harness (16) into main wiring harness and install keeper pin (20).
(3)
Install clamp (19) and nut (18).
(4)
Position receptacle cover (15) onto gooseneck frame (9) and secure with four screws (13),
washers (14) and new self-locking nuts (17).
(5)
Install receptacle harness (7) to gooseneck frame (9) and feed through grommet (5).
Install grommet (5).
(6)
Connect receptacle harness to main harness and install keeper pin (2).
NOTE
Be sure receptacle is installed with the keyway in the down position.
(7)
Install receptacle cover (10) to gooseneck frame (9). Install four bolts (12), washers (11)
and new self-locking nuts (8).
(8)
Install two clamps (6), two nuts (4) and four zip-ties (3).
4-36
