TM 5-2330-325-13&P
FIELD MAINTENANCE
TOOL BOX REPAIR
INITIAL SETUP:
Tools and Special Tools
Materials/Parts (cont.)
Tool Kit, General Mechanic's
Qty: (6) WP 0125, Figure 28, Item 11
(WP 0144, Table 1, Item 16)
Remover, Paint (WP 0143, Table 1, Item 22)
Gloves, Chemical and Oil Protective
(WP 0144, Table 1, Item 7)
Personnel Required
Torch, Cutting
Two
(WP 0144, Table 1, Item 17)
Welder, Arc, Portable
(WP 0144, Table 1, Item 18)
References
TC 9-237
Materials/Parts
Hinge Pin Qty: (3) WP 0125, Figure 28, Item 2
Equipment Condition
Nut, Self-Locking
Semitrailer parked on level ground (WP 0005)
Qty: (10) WP 0125, Figure 28, Item 8
Nut, Self-Locking
WARNING
The tool box lid is secured by two pneumatic openers. Caution should be used
when opening the tool box. Failure to comply may result in death or injury to
personnel. Seek medical attention in the event of an injury.
The tool box weighs 250 lb (113.39 kg). The tool box replacement requires a lifting
device rated at a minimum of 500 lb (226 kg) and two personnel. Failure to comply
may result in death or injury to personnel. Seek medical attention in the event of
an injury.
0085-1
02/13/2013root(maintwp)wpno(M1053)
