TM 5-2330-325-13&P
0046
REMOVAL
1.
Grasp lens (Figure 1, Item 1 or 7) and work or pry lens away from grommet (Figure 1, Item 2 or 6).
2.
Release locking tabs (Figure 1, Item 5) if present and disconnect lens (Figure 1, Item 1 or 7) from electrical
connector (Figure 1, Item 3 or 4).
END OF TASK
INSTALLATION
1.
Connect electrical connector (Figure 1, Item 3 or 4) to rear of lens (Figure 1, Item 1 or 7) and ensure locking
tab (Figure 1, Item 5), if present, engages.
NOTE
To facilitate seating of lens in grommet, liquid soap may be used to lubricate grommet.
2.
Position lens (Figure 1, Item 1 or 7) on grommet (Figure 1, Item 2 or 6) and evenly push on lens until it seats
in place.
2
1
3
4
5
6
7
466-0045
Figure 1.
Clearance and Running Lights Replacement.
END OF TASK
FOLLOW ON TASK
Connect power source and test electrical system for proper operation.
END OF TASK
END OF WORK PACKAGE