TM 5-2330-325-13&P
0033
Table 1.
Operator Preventive Maintenance Checks and Services (PMCS) Procedures - Continued.
ITEM TO BE
EQUIPMENT
ITEM
CHECKED OR
NOT READY/
NO.
INTERVAL
SERVICED
PROCEDURE
AVAILABLE IF:
25
Before
Wipe connectors clean, connect hydraulic lines from
Any Class III leaks
gooseneck to towing vehicle (WP 0005), and check for
are evident.
leaks.
26
Before
Gooseneck
Check gooseneck operation (WP 0005).
Gooseneck does not
operate correctly
NOTE
27
During
If semitrailer will not be used for 72 hours or
more, lightly coat exposed cylinders with
grease.
Check for leaks.
Any Class III leaks are
evident.
28
During
Gooseneck
Check gooseneck operation (WP 0005).
Gooseneck does not
operate correctly
29
During
Gladhands
Check for leaks at gooseneck gladhand connections.
Any leaks are evident.
30
During
Brakes
Operate semitrailer brakes and ensure brakes at all six Semitrailer brakes
wheel positions are operating properly.
inoperative.
31
After
Tires
Check tire pressure when tires are cool.
Any tire is flat, missing, or
unserviceable.
32
After
Wheels
Check wheels for damage. Check for debris or foreign
A wheel is damaged or
objects lodged between wheels.
unserviceable.
33
After
Lug Nuts
Check lug nuts for tightness and ensure all lug nuts
A lug nut is missing.
are installed.
34
After
Hub Mileage
Inspect hub mileage meter (Figure 4) for damage. Note
Meter
mileage and check for proper operation.
466-0027a
Figure 4.
Hub Mileage Meter Check.