TM 5-2330-325-13&P
0033
Table 1.
Operator Preventive Maintenance Checks and Services (PMCS) Procedures - Continued.
ITEM TO BE
EQUIPMENT
ITEM
CHECKED OR
NOT READY/
NO.
INTERVAL
SERVICED
PROCEDURE
AVAILABLE IF:
16
Before
Tool Box
Check tool box cover for proper operation
and serviceability.
17
Before
Deck Planking
Inspect planking (Figure 2, Item 1) for damaged or
Planks are missing.
broken boards.
18
Before
Deck Hardware
Check for missing or damaged bolts and fastening
hardware (Figure 2, Item 2).
19
Before
Outriggers
Check for proper operation of folding outriggers
Outrigger load prohibited
(Figure 2, Item 5).
if any outriggers or
boards are unserviceable.
20
Before
Tiedown Points
Check D-rings (Figure 2, Item 3) and chain slots
Tiedown points are
(Figure 2, Item 4) for serviceability.
damaged or unusable.
21
Before
Chains and
Check chains (Figure 2, Item 6), load binders
Loadbinders or chains not
Loadbinders
(Figure 2, Item 7), and other tiedowns for serviceability
sufficient for proper
and proper quantity.
3
2
1
4
7
6
5
466-0028
Figure 2.
Deck Planking, Outriggers, and Tiedowns.
NOTE
22
Before
Brakes
Any drop in air pressure will indicate an
air leak.
Check for leaks in air brake system by shutting off
Any leaks are evident.
truck tractor engine when air pressure is at maximum.
Observe air pressure gage for 1 minute.