M1070 HET ARMOR KIT
II113400
Rev. D
5. Install door strap assembly as follows (see Figure 3-81):
a. Remove one existing bolt and washer from top of door as shown in Figure 3-81.
b. Install door strap assembly (1) onto door and secure to door with one bolt and washer removed in
previous step. Torque bolt to 13 lb-ft.
c. Locate and drill one ∅11/32-inch hole into door opening frame as shown in Figure 3-81.
d. Secure loose end of door strap assembly (1) to door opening frame and secure with one bolt (2),
two flat washers (3), and one locknut (4). Torque locknut to 18 lb-ft.
e. Repeat Step 5 on opposite side of vehicle.
INSTALLATION 3-160
JUNE 2005