M1070 HET ARMOR KIT
II113400
Rev. D
a. Installation
1. Install center windshield bracket onto windshield armor panel as follows (see Figure 3-2):
a. Install one center windshield bracket (1) onto windshield armor panel (2) and secure with five locknuts
(3) and flat washers (4). Torque locknuts to 7 lb-ft.
NOTE
Lift brackets are intended for temporary use only and must be removed after
windshield armor panel is installed.
b. Position two lift brackets (5) onto front surface of windshield armor panel (2) and secure each with
one bolt (6), flat washer (7), and jam nut (8).
1
7
5
6
8
4
3
2
Figure 3-2. Center Windshield Bracket onto Windshield Armor Panel Installation.
2. Install side windshield brackets as follows (see Figure 3-3):
JUNE 2005