TB 9-2320-360-13&P-1
A/C EVAPORATOR/BLOWER HARNESS REPLACEMENT - CONTINUED
0027 00
REMOVAL
N OT E
Tag and mark all wires prior to removal.
1.
Remove two orange wires (1), one red wire (2), and one yellow wire (3) from A/C blower resistor (4).
2.
Remove two brown wires (5 and 6) from thermostatic switch (7).
3.
Remove A/C evaporator/blower harness (8) from A/C evaporator (9).
449--605
INSTALLATION
1.
Install A/C evaporator/blower harness (8) through hole in A/C evaporator (9).
2.
Install two brown wires (5 and 6) on thermostatic switch (7).
3.
Install two orange wires (1), one red wire (2), and one yellow wire (3) on A/C blower resistor (4).
4.
Install A/C blower in A/C evaporator subsystem (WP 0022 00).
5.
Install A/C evaporator subsystem (WP 0036 00).
6.
Connect batteries (TM 9-2320-360-20-2).
7.
Remove wheel chocks (TM 9-2320-360-10).
END OF WORK PACKAGE
0027 00-2