TB 9-2320-360-13&P-1
A/C PRESSURE SWITCH REPLACEMENT - CONTINUED
0029 00
INSTALLATION
WAR N I N G
Adhesives and sealing compounds can burn easily, can give off harmful vapors and are harmful to skin and
clothing. To avoid injury or death, keep away from open fire and use in well-ventilated areas. If adhesive or
sealing compound gets on skin or clothing, wash immediately with soap and water.
1.
Apply sealing compound to threads of pressure switch
(2).
2.
Install pressure switch (2) on receiver/dryer (3).
3.
Connect pressure switch connector (1) to wiring har-
ness.
HETF00315
4.
Connect batteries (TM 9-2320-360-20-2).
5.
Close hood (TM 9-2320-360-10).
6.
Remove wheel chocks (TM 9-2320-360-10).
END OF WORK PACKAGE
0029 00-2