TB 9-2320-360-13&P-1
A/C ENGINE FAN CONTROL SOLENOID REPLACEMENT - CONTINUED
0026 00
REMOVAL
CAU T I ON
Cap and plug all lines and fittings or damage to equipment may result.
N OT E
Tag and mark wires, hoses, and fittings prior to removal.
Install caps and plugs on hoses and fittings, as required, to prevent contamination.
1.
Disconnect connector (1).
2.
Remove supply air line (2) from elbow (3).
3.
Remove thermostatic switch inlet air line (4) from elbow (5).
4.
Remove locknut (6), screw (7), and fan control solenoid assembly (8) from bracket (9). Discard locknut.
5.
Remove two elbows (3 and 5) from fan control solenoid assembly (8).
6.
Remove screw (10) and bracket (9) from ECM (11).
HETF00295
0026 00-2